IBM Books

Event Logging System Messages Guide


VCRM

This chapter describes VCRM messages. For information on message content and how to use the message, refer to the Introduction.

VCRM.001 

Level: UI-ERROR

Short Syntax: VCRM.001 VCRM No Rsrcs Failure_type Routine

Long Syntax: VCRM.001 VCRM Insufficent resources of type Failure_type in Routine

Description: VCRM Could not obtain needed resources (memory)

VCRM.002 

Level: UI-ERROR

Short Syntax: VCRM.002 VCRM Correlator_type Crrltr Correlator Msmtch Routine

Long Syntax: VCRM.002 VCRM Correlator_type Correlator Correlator Mismatch in routine Routine

Description: VCRM Unknown correlator of specified type encountered

VCRM.003 

Level: UI-ERROR

Short Syntax: VCRM.003 VCRM Unxpctd Condition Code from Routine

Long Syntax: VCRM.003 VCRM Unexpected Condition Code from Routine

Description: VCRM Unexpected condition occured

VCRM.004 

Level: P-TRACE

Short Syntax: VCRM.004 VCRM Event_type Evnt Added_info1 Added_info2 Added_info3 in Routine

Long Syntax: VCRM.004 VCRM Event_type event occured Added_info1 Added_info2 Added_info3 in routine Routine

Description: VCRM A trace event in VCRM occured

VCRM.005 

Level: U-TRACE

Short Syntax: VCRM.005 var1= val1

Long Syntax: VCRM.005 component var1 var1= val1

Description: generic dump of intServ spec content (one floating point field)

VCRM.006 

Level: U-TRACE

Short Syntax: VCRM.006 var1= val1

Long Syntax: VCRM.006 component var1 var1= val1

Description: generic dump of intServ spec content (one integer field)

VCRM.007 

Level: P-TRACE

Short Syntax: VCRM.007 VCRM event avg= avg peak= peak burst= burst minpkt= minmtu maxpkt= maxmtu on i/f oif to gateway

Long Syntax: VCRM.007 VCRM event evnt; avgrate= avg peak= peak burst= burst minTU= minmtu maxTU= maxmtu on out i/f oif to nxt-hop gateway

Description: dump out the VCRM add/delete resveration QoS parameters, output i/f, and next-hop gateway.

VCRM.008 

Level: U-TRACE

Short Syntax: VCRM.008 var1= v1; var2= v2; var3= v3; var4= v4

Long Syntax: VCRM.008 component var1 var1= v1; var2 var2= v2; var3 var3= v3; var4 var4= v4

Description: A generic trace for unusual events; var1 shows module name and first trace variable name, v1 shows the first trace variable value; var2 show second trace variable name, v2 shows second trace variable value, and so on (in hex values).

VCRM.009 

Level: UI-ERROR

Short Syntax: VCRM.009 VCRM Unxpctd Condition Code ErrorMsg from Routine

Long Syntax: VCRM.009 VCRM Unexpected Condition Code ErrorMsg from Routine

Description: VCRM Unexpected condition occured

VCRM.010 

Level: U-TRACE

Short Syntax: VCRM.010 var1= v1; var2= v2; var3= v3; var4= v4

Long Syntax: VCRM.010 component var1 var1= v1; var2 var2= v2; var3 var3= v3; var4 var4= v4

Description: A generic trace for unusual events; var1 shows module name and first trace variable name, v1 shows the first trace variable value; var2 show second trace variable name, v2 shows second trace variable value, and so on (in decimal values).

VCRM.011 

Level: P-TRACE

Short Syntax: VCRM.011 DSRM strm streamId action chng= deltaBw sum= sumBw Module

Long Syntax: VCRM.011 DSRM stream id streamId action deltaBw total amount sumBw Module

Description: A DS stream used by RSVP changed its reservation amount.


[ Top of Page | Previous Page | Next Page | Table of Contents ]